Train Kellan: Second Post - Framed

This is going to be short and sweet today... Or probably just short.

So here's the framed version of Kellan's Train themed name:

We just framed it exactly the same way as we had framed Logan's.  Everything's the same, the size, the mat colors, the mat widths, and the frame.  So nothing really exciting here.  Now just to wait for November for him to open it on his birthday.

Train Kellan: Second Post - Completed

I finished up Kellan's train name this morning.

Here's the smoke/steam is added to the letter K, it's gray Kreinik.  The original pattern had the smoke/steam fully stitched, but since I was trying to match the other one I made I just kept it as an outline.

So next up was the A.  I did the same thing on this one as the A in the other one.  It got a hat.  This time and engineer hat.  This one was the moth difficult to make.  I did finally find a hat in the correct orientation, but the only way I could achieve what I wanted included a massive amount of back-stitching.  But I'm getting ahead of myself.

First off is the A.

The hat is all one color, so this was an easy one to stitch.

And then the crazy amount of back-stitching:

This is the letter that I'm least happy with, but when I look at it from far away I don't think it looks too bad.

The next letter is the last, so it has to be the caboose.  This one started as a caboose I found online.  But I did modify it quite a bit.  It was a more realistic looking caboose.  I altered it heavily to try to give it the same look as the engine.  This one went through a few edits after sending some samples to my sister.

The letter N is quite covered, not as much as the K though.

All stitched in the standard red color, with a little bit of yellow to make it a little more interesting.

This had a bit of back stitching too, but not as much as the engine.

At the bottom I added a border, but this time I just kept it simple as a train track, however it was a lot of stitches and seemed to take forever.

All done!  And done long before I needed to have it done.  Now I just need to get it framed.

Project Stats:
Pattern: Train Kellan
Pattern by: Me, using letters from Firefighter's Sampler
Started Stitching: May 23, 2016
Finished Stitching: June 3, 2016
Fabric: 28ct. White Evenweave
Floss: DMC 2 over 2, or 1 over 2 Kreinick #4 Braid
Percentage: 100% complete
Stitches: 3,772 out of 3,772 complete

Train Kellan: First Post

Some of you may remember the name I cross stitched for my first nephew, Logan.  For those of you who have no idea what I'm talking about you can find the posts here.

My younger nephew likes trains, that is what my sister thinks she wants to change his room to.  However, she's having difficulties finding anything other than Thomas the Train, and she doesn't want to go that route.  So I started scouring the internet for train letters.  I found quite a few, but none were what I wanted.  Most were an engine on the front, letters on flatbeds and a caboose.  However, I wanted to keep the two as similar to each other as I could.  So I decided to do the only thing I could, design my own.

And that's what I did.  I used the same letters from the original Firefighter's Sampler and created a train theme.

The first letter up is L, or Ls.  I decided these would work well for some train crossing signals, one for each L.  I found an photograph and copied it as best I could.  However, the only way I could get it to work the way I wanted was for the poles to be off a half a stitch, and since I was going to be stitching this on evenweave it seemed completely doable.

First the letter, in the same blue color as Logan's, I had originally thought of changing it to green.  But my sister suggested to keep it the same color.  I think I like the pattern better with the blue anyway.

Now for the crosses of the crossing signals.

And some back-stitching so you can actually see where the white is.

And there they are.

Next up is the E.  My sister suggested a tunnel for the A, but I already had another idea for the A, and I thought that too much would be covered up of the tunnel if I used that letter, so the tunnel went to the E.  This one I just made up.  I didn't use a picture or anything, I just kind of did a stereotypical tunnel.

E first, the entire E is actually visible, the tunnel goes behind it.

So when I counted and double counted to make sure I counted right, I eventually found that I hadn't counted right.  Everything was two stitches too far to the right.  I knew I had to fix it or the tunnel would run into the signals, and I didn't want that, so I did a little creative cross stitching and corrected my mistake without having to tear out every single stitch.

Now for the tunnel.  I tried to make a kind of brick looking archway around it.  And it's dark in there, so there's black, and then the light gray on the bottom for the rock ballast that hold the wooden ties.

Originally there was going to be a cross stitched line of brown for the closest tie, but I was showing my design progress to my sister and she thought it looked weird and asked me try it without it, and after I altered it, I agreed the new design looked better.

Which leads me to the next image with all the back-stitching.

The "closest" two ties are actually long-stitched with two strands, while the rest are single strands, and I did long stitches as well for the rails so they looked like one continuous piece of metal.  I didn't back-stitch around the brown, I was hoping that would give the feeling like the brown didn't end there, but rather continued to the rest of the hill.

Next one is K.  This is the first one designed, and, I have to admit, this is the letter that I designed the least.  Since the K is the first letter it seemed fitting that it would have the engine.  I had found a simple pattern that I really liked, and, surprisingly enough, it ended up being the perfect size.  So, I copied it, my apologies to whoever actually created it, but since I'm not selling this I think I'm okay.  But here's the blog post with the original image I used to create mine.

After my misadventure with the E I decided to make doubly sure that I counted correctly on the K.  And I failed, this time it was one stitch too far right.  Maybe I'll have more luck with the other two letters.

Here's the train in front of the K.

And a massive amount of back-stitching was done on this.

You may have noticed a few missing back-stitches on the K, well, that's where I'm going to use a gray Kreinik for the steam or smoke coming out of the stack.  I just forgot the Kreinik at home.

Project Stats:
Pattern: Train Kellan
Pattern by: Me, using letters from Firefighter's Sampler
Started Stitching: May 23, 2016
Fabric: 28ct. White Evenweave
Floss: DMC 2 over 2
Percentage: 57.63% complete
Stitches: 2,174 out of 3,772 complete

So, this was one of the two pieces I was supposed to work on next from my list.  Even though his birthday isn't until November, I wanted to get it done before a custom framing coupon expires.  However, I ordered a kit from HAED.  And it's VERY tempting to start on it.  I must resist!